Filter
Top Products
27-11
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 27 Monitoring Cable Technologies
Configure Cable Ports and Interfaces
Configure Cable Ports and Interfaces
These commands help in configuring the cable ports and IP interface. The table below lists the
navigation of each of these commands. To run the these commands, the software on the network element
must support the technology. Before executing any commands, you can preview them and view the
results.
For details on the supported device list for these configuration commands and the software versions
Prime Network supports for the supported network elements, see Cisco Prime Network 4.0 Supported
Cisco VNEs.
Note You might be prompted to enter your device access credentials while executing a command. Once you
have entered them, these credentials will be used for every subsequent execution of a command in the
same GUI client session. If you want to change the credentials, click Edit Credentials. The Edit
Credentials button will not be available for SNMP commands or if the command is scheduled for a later
time.
Configure Cable Ports
Command Navigation Description
Modify Port Physical Inventory >
Ethernet Slot > navigate to
Ethernet port >
Commands >
Configuration > Port
Controls a variety of RFGW port characteristics
(status of port, IP address type and so forth).
Modify Cable Port Physical Inventory >
Chassis > Slot > Subslot >
Cable > Commands >
Configuration > Port
Controls a variety of uBR10000 port
characteristics (status of port, bundle ID and so
forth).
Configure
Downstream Port
Physical Inventory >
Chassis > Slot > Subslot >
Cable > Commands >
Configuration > Downstr
eam
Configure and enable the downstream ports on the
Cisco uBR10K card. Configure parameters like
modulation rate, downstream interleave depth in
number of rows of code words, and so on.
Create Upstream
Port
Modify Upstream
Port
Physical Inventory >
Chassis > Slot > Subslot >
Cable or Ethernet port
> Commands >
Configuration > Upstrea
m
Create or modify an upstream port.