Filter
Top Products
8-13
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 8 Tracking Faults Using Prime Network Events
Working with Cisco Prime Network Events
Table 8-14 Advanced Tab
Field Description
Duplication Count For network events, the duplication count is calculated by the VNE and
pertains only to flapping events. The duplication count represents the
number of noncleared events aggregated by the flapping event.
Reduction Count For network events, the reduction count is calculated by the VNE and
pertains only to flapping events. The reduction count represents the number
of events that are aggregated by the flapping event.
Affected Devices The number of devices affected by the ticket.
Alarm Count The total number of alarms associated with the ticket, including the root
alarm.
Table 8-15 Audit Tab
Field Description
User Name Name of user who initiated the command.
Result Command result, if available.
Originating IP IP address of the client that issued the command.
Command Signature Actual command run by Prime Network, such as
GetEventViewerProperties.
Command Parameters Parameters applied to the command.
Table 8-16 Provisioning Tab
Field Description
User Name Name of the user who performed the provisioning operation.
Status Status of the operation: Success or Fail.
Table 8-17 Security Tab
Field Description
User Name Name of the user who triggered the event.
Client Type Client that triggered the event: Cisco Prime Network Vision, Cisco Prime
Network Administration, Cisco Prime Network Events, or Unknown.
Originating IP IP address of the client where the event was triggered.