Cisco Systems 4 Video Gaming Accessories User Manual


  Open as PDF
of 1040
 
22-12
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 22 Monitoring AAA Configurations
Configuring AAA Groups
Configuring AAA Groups
The following commands can be launched from the inventory by choosing AAA
Group > Commands > Configuration.
The table below lists AAA Group configuration commands. Additional commands may be available for
your devices. New commands are often provided in Prime Network Device Packages, which can be
downloaded from the Prime Network software download site. For more information on how to download
and install DPs and enable new commands, see the information on “Adding Additional Device (VNE)
support” in the Cisco Prime Network 4.0 Administrator Guide.
Before executing any commands, you can preview them and view the results. If desired, you can also
schedule the commands. To find out if a device supports these commands, see the Cisco Prime Network
4.0 Supported Cisco VNEs.
Note You might be prompted to enter your device access credentials while executing a command. Once you
have entered them, these credentials will be used for every subsequent execution of a command in the
same GUI client session. If you want to change the credentials, click Edit Credentials. The Edit
Credentials button will not be available for SNMP commands or if the command is scheduled for a later
time.
Table 22-12 Radius Charging Triggers Configuration
Field Name Description
Serving Node Change Indicates whether RADIUS trigger for serving node is enabled.
Radio Access
Technology Change
Indicates whether RADIUS trigger for radio access technology change
is enabled.
User Location
Information Change
Indicates whether RADIUS trigger for user location information change
is enabled.
Routing Area
Information Change
Indicates whether RADIUS trigger for routing area information change
is enabled.
Quality of Service
Change
Indicates whether RADIUS trigger for quality of service change is
enabled.
Mobile Station
Timezone Change
Indicates whether RADIUS trigger for mobile station time zone change
is enabled.