Filter
Top Products
20-23
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 20 Monitoring MToP Services
Viewing Channelization Properties
Step 3 To view additional information about a DS1channelized path, double-click the required entry in the
Channelized DS1 table. Figure 20-12 shows the information that is displayed in the Channelized DS1
PDH Properties window.
DS3 Area
Admin Status Administrative status of the DS3 line.
Oper Status Operational status of the DS3 line.
Port Type Type of port.
Last Changed Date and time of the last status change of the line.
Maximum Speed Maximum bandwidth for the line.
Port Description Description of the port configured on the interface.
Recovered Clocking ID Recovered clock identifier, if known.
Scrambling Any scrambling that has been applied to the SONET payload.
Framing Type of framing applied to the line.
Loopback Loopback setting configured on the line.
Clocking Clocking configured on the line: Internal or Line.
Alarm State Alarm state of the DS3 line:
• Clear—The alarm state is clear.
• AIS—Alarm Indication Signal (AIS).
• LOS—Loss of signal (LOS) alarm.
• AIS_LOS—AIS loss of signal alarm.
• LOF—Loss of frame (LOF) alarm.
• AIS_LOF—AIS loss of frame alarm.
• LOS_LOF—Loss of signal and loss of frame alarm.
• AIS_LOS_LOF—AIS loss of signal and loss of frame alarm.
• Unknown—Unknown alarm.
Internal Port Whether or not the line includes an internal port: True or False.
Line Code Line coding applied to the line.
Table 20-13 Channelized DS1 and DS3 Properties (continued)
Field Description