Filter
Top Products
21-10
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 21 Viewing and Managing SBCs
Viewing SBC SBE Properties
Viewing SIP Properties
To view SIP properties, choose Logical Inventory > Session Border Controller > SIP.
Table 21-11 describes the SIP entries that appear in logical inventory for the SBC SBE.
QoS Profile QoS profiles can be used by CAC policies and are used exclusively for marking
IP packets.
The QoS Profile table contains the following information:
• Name—The name of the QoS profile.
• Class of Service—The type of call this profile applies to, such as voice,
video, signaling, or fax.
• Marking Type—The type of marking to be applied to the IP packet. Options
include Passthrough, Differentiated Service Code Point (DSCP), and IP
Precedence/ToS.
• IP Precedence—If the marking type is IP Precedence, the specified
precedence, either 0 or 1.
• ToS—If the marking type is ToS, the ToS value.
• DSCP—If the marking type is DSCP, the DSCP value.
SDP The Session Description Protocol (SDP) content pane contains the following
tabs, each with their respective table:
• SBE SDP Policy Table:
–
Instance Name—The name of the policy table.
–
SBE SDP Match Table—The name of the SDP match table.
• SBE SDP Match Table:
–
Instance Name—The name of the SDP match table.
–
Match Strings—The match criteria.
–
Table Type—The type of table, either Blacklist or Whitelist.
Table 21-10 Policy Properties (continued)
Branch Description