14-13
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 14 Monitoring DWDM Properties
Viewing Performance Monitoring Configuration
Optics PM Settings Tab
Type Optics performance monitoring parameter being tracked:
• LBC—Laser bias current.
• OPR—Optical power on the unidirectional port.
• OPT—Transmit optical power in dBm.
Max Threshold Maximum threshold configured for the parameter.
Max TCA If enabled, indicates a TCA is generated if the value of the parameter exceeds the maximum
threshold during the performance monitoring period. If disabled, TCAs are not generated if the
maximum threshold is exceeded.
Min Threshold Minimum threshold configured for the parameter.
Min TCA If enabled, indicates a TCA is generated if the value of the parameter drops below the minimum
threshold during the performance monitoring period. If disabled, TCAs are not generated if the
value drops below the minimum threshold.
Table 14-6 Client DWDM PM Settings Properties Window and Tabs (continued)
Field Description