Filter
Top Products
12-27
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 12 Monitoring Carrier Ethernet Services
Working with Ethernet Link Aggregation Groups
Table 12-15 LAG IEEE 802.3 AD Properties
Field Description
Group Number Aggregation group number.
Bandwidth Aggregation bandwidth.
Control Protocol Aggregation control protocol: Manual, Link Aggregation Control
Protocol (LACP), or Port Aggregation Protocol (PagP).
MAC Address Aggregation MAC address.
Administrative State Aggregation administrative status: Up or Down.
Operational State Aggregation operational status: Up or Down.
Dot3ad Agg Partner System Priority Priority of the partner system.
Dot3ad Agg MAC Address Aggregation MAC address.
Dot3ad Agg Actor Admin Key Actor administrative key.
Dot3ad Agg Actor System Priority Actor system priority.
Dot3ad Agg Partner Oper Key Partner operational key.
Dot3ad Agg Actor Oper Key Actor operational key.
Dot3ad Agg Collector Max Delay Maximum delay (in microseconds) for either delivering or discarding a
received frame by the frame collector.
Dot3ad Agg Actor System ID Actor system identifier, in the form of a MAC address.
Dot3ad Agg Partner System ID Partner system identifier, in the form of a MAC address.
mLACP Properties
mLACP properties are displayed if the aggregation group is associated
with an ICCP redundancy group.
ICCP Redundancy Group ICCP redundancy group associated with this aggregation group,
hyperlinked to the relevant entry in logical inventory.
mLACP Role Role of the LAG in the redundancy group: Active or Standby.
mLACP Operational System MAC MAC address used in a dual-homed environment that is selected by
ICCP from one of the configured system MAC addresses for one of the
points of attachment (PoAs).
mLACP Operational System Priority Priority used in a dual-homed environment that is selected by ICCP from
the configured system priority on one of the PoAs.
mLACP Failover Option Configured mLACP failover mode: Revertive or Nonrevertive.
mLACP Max Bundle Maximum number of links allowed per bundle.
Aggregated Ports Table
ID Port identifier, hyperlinked to the interface in physical inventory.
Type Type of VLAN, such as Layer 2 VLAN.
Discovery Protocols Discovery protocols used on this port.