Filter
Top Products
25-116
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 25 Monitoring Mobile Technologies
Viewing Operator Policies, APN Remaps, and APN Profiles
Prime Network Vision displays the list of APN profiles configured under the container. You can view
the individual APN profile details from the table on the right pane or by choosing Logical
Inventory > local > Mobile > Profile > APN Profiles > APN Profile.
Table 25-73 describes the details available for each APN remap.
If additional properties are configured for the APN profile, you can click the respective tabs on the
content pane to view the details:
–
Gateway Entries
–
RANAP ARP Entries
–
QoS Class Entries
–
Uplink Traffic Policing Entries/Downlink Traffic Policing Entries
Table 25-73 APN Profile Properties in Logical Inventory
Field Description
Name Name of the APN profile.
Description Description of the APN profile.
QoS Service Capping
Prefer Type
Operational preferences for QoS parameters, specifically QoS bit rates.
Value could be one of the following:
• both-hlr-and-local—Instructs the SGSN to use the locally configured
QoS or HLR subscription.
• hlr-subscription—Instructs the SGSN to use QoS bit rate from HLR
configuration and use the same for session establishment.
• local—Instructs the SGSN to use the locally configured QoS bit rate and
use the same for session establishment.
Address Resolution
Mode
Address resolution mode of the APN profile, which could be one of the
following:
• fallback-for-dns—Uses DNS query for address resolution.
• local—Uses locally configured address.
CC Preferred Source Charging characteristic settings to be used for S-CDRs, which could be one
of the following:
• hlr-value-for-scdrs—Instructs the system to use charging characteristic
settings received from the HLR for S-CDRs.
• local-value-for-scdrs—Instructs the profile preference to use only
locally configured/stored charging characteristic settings for S-CDRs.
CC Local SCDR
Behavior Bit
Value of the behavior bit for the charging characteristics for S-CDRs.
CC Local SCDR
Behavior Profile Index
Value of the profile index for the charging characteristics for S-CDRs.
GGSN Algorithm
Applicable
Selection algorithm for GGSNs. This parameter allows the operator to
configure multiple GGSN pools by assigning the GGSN to a secondary pool
of GGSNs.