Filter
Top Products
25-106
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 25 Monitoring Mobile Technologies
LTE Networks
Viewing the Local Mobility Anchor Configuration (LMA)
Proxy Mobile IPv6 (or PMIPv6, or PMIP) is a network-based mobility management protocol for
building a common access technology independent of mobile core networks, accommodating various
access technologies such as WiMAX, 3GPP, 3GPP2 and WLAN based access architectures.
The PMIPv6 provides network-based IP Mobility management to a mobile node, without requiring the
participation of the MN in any IP mobility-related signaling. The mobility entities in the network track
the movements of the MN, initiate the mobility signaling, and set up the required routing state.
Show PDSN Expand PDSN node > right-click
PDSN service > Commands > Show
Use this command to view and confirm the
PDSN service configuration details.
Modify GRE Expand PDSN node > PDSN service >
right-click GRE > Commands >
Configuration
Use this command to modify the Generic
Routing Encapsulation (GRE) configuration
settings for a specified PDSN service.
Modify IP
Source
Violation
Expand PDSN node > PDSN service >
right-click IP Source Violation >
Commands > Configuration
Use this command to modify the IP Source
Violation configuration details for the
specified PDSN service.
Modify
MSID
Expand PDSN node > PDSN service >
right-click MSID > Commands >
Configuration
Use this command to modify the mobile
station ID (MSID) configuration details for
the specified PDSN service.
Modify PCF
Parameters
Expand PDSN node > PDSN service >
right-click PCF > Commands >
Configuration
Use this command to modify the Packet
Control Function (PCF) configuration details
for the specified PDSN service.
Create PCF
Security
Entry
Expand the PDSN node > right-click
PDSN service > Commands >
Configuration
Use this command to create a new PCF
security entry.
Modify PCF
Security
Entry
Delete PCF
Security
Entry
Expand PDSN node > PDSN service >
PCF > Under Security Profiles tab n
the content pane, right-click SPI
Number > Commands >
Configuration
Use these commands to modify/delete the
PCF security entry details.
Modify
Policy
Expand PDSN node > PDSN service >
right-click Policy > Commands >
Configuration
Use this command to modify the policy
configuration details for the PDSN service.
Modify PPP Expand PDSN node > PDSN service >
right-click PPP> Commands >
Configuration
Use this command to modify the
Point-to-Point Protocol configuration details
for the selected PDSN service.
Modify
Registrations
Expand PDSN node > PDSN service >
right-click Registrations >
Commands > Configuration
Use this command to modify the registration
details for the selected PDSN service.
Modify
Timers and
Registrations
Expand PDSN node > PDSN service >
right-click Timers and Registrations
> Commands > Configuration
Use this command to modify the timers and
registration details for the selected PDSN
service.
Table 25-67 PDSN Configuration Commands (continued)
Command Navigation Description