Filter
Top Products
26-39
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 26 Monitoring Data Center Configurations
Viewing the Storage Area Network Support Details
Table 26-13 VSAN Configuration Details
Field Name Description
VSAN ID The unique identification code of the VSAN.
Name The name of the VSAN.
Admin Status The administrative status of the VSAN, which can be any one of the
following:
• Active—Indicates that the VSAN is configured and enabled and that
you can activate the services of the VSAN.
• Suspended—Indicates that the VSAN is configured, but not
enabled. Any port configured in this VSAN will also be disabled.
Oper Status The operational status of the VSAN, which can be any one of the
following:
• Up
• Down
Load Balancing Type The method used for load balancing path selection in the VSAN, which
can be any one of the following:
• Source destination ID
• Originator Exchange OX ID
Inter Oper Mode The inter operations mode.
Associated VLAN The name of the VLAN associated to the VSAN.
In Order Delivery The in order delivery of the VSAN.
MTU The maximum number of transmission units (in bytes) of the VSAN.
Fibre Channel Domain
Domain ID The domain ID of the Fibre Channel domain.
Oper Status The operational status of the Fibre Channel domain, which can be any
one of the following:
• Stable
• Enable
• Disable
Running Priority The assigned priority of the switch. This field defaults to 128.
Local Switch WWN The local switch World Wide Name (WWN) for the Fibre Channel,
which is a unique identifier in the SAN.
Running Fabric Name The WWN number of the Fabric to which the switch belongs.
VSAN Interfaces
Name The name of the VSAN technology interface.
Associated Entity The associated Fibre Channel interface, which when clicked will take
you to the relevant Fibre channel node under the Chassis node.