13-7
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 13 Monitoring Carrier Grade NAT Properties
Configuring CG NAT Service
Note You might be prompted to enter your device access credentials while executing a command. Once you
have entered them, these credentials will be used for every subsequent execution of a command in the
same GUI client session. If you want to change the credentials, click Edit Credentials. The Edit
Credentials button will not be available for SNMP commands or if the command is scheduled for a later
time.
Command Navigation Description
Add Static Port
Forwarding
Configure > To configure CG NAT service instance for
static port forwarding.
Add NAT 64
Forwarding
Configure > To configure CG NAT service instance for
NAT 64.
Add 6rd Forwarding Configure > To configure CG NAT service instance for
6rd.
Static Port Forwarding Delete > Click Execute Now to remove CG NAT
instance.
Pool Utilization Show > Display the CGN instance name, inside
VRF name, start and end address