Filter
Top Products
18-51
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 18 Monitoring MPLS Services
Monitoring MPLS Services
Table 18-27 Pseudowires Branch Tunnel Edges Table
Field Description
Local Interface Name of the subinterface or port.
Strings, such as Aggregation Group, EFP, VLAN, and VSI, are included in the interface name, and
the entry is hyperlinked to the relevant entry in logical or physical inventory:
• Aggregation groups are linked to Ethernet Link Aggregation in logical inventory.
• ATM interfaces are linked to the port in physical inventory and the ATM interface.
• ATM VCs are linked to the port in physical inventory and the Port IP Properties table.
• CEM groups are linked to the port in physical inventory and the CEM Group table.
• EFPs are linked to the port in physical inventory and the EFPs table.
• IMA groups are linked to IMA Groups in logical inventory.
• Local switching entities are linked to Local Switching Entity in logical inventory.
• VLANs are linked to Bridges in logical inventory.
• VSIs are linked to the VSI entry in logical inventory.
VC ID Tunnel identifier, hyperlinked to the PTP Layer 2 MPLS Tunnel Properties window.
Peer Details of the selected peer, hyperlinked to the peer pseudowire tunnel in logical inventory.
Status Operational state of the tunnel: Up or Down.
Pseudowire Role If the pseudowire is in a redundancy configuration, indicates whether its role is as the primary or
secondary pseudowire in the configuration.
If the pseudowire is not configured for redundancy, this field is blank.
Preferred Path
Tunnel
Path to be used for MPLS pseudowire traffic.
Local Router IP IP address of this tunnel edge, which is used as the MPLS router identifier.
Peer Router IP IP address of the peer tunnel edge, which is used as the MPLS router identifier.
Pseudowire Type Type of pseudowire, such as Ethernet, Ethernet Tagged, CESoPSN Basic, PPP, or SAToP.
Local MTU Size, in bytes, of the MTU on the local interface.
Remote MTU Size, in bytes, of the MTU on the remote interface.
Local VC Label MPLS label that is used by this router to identify or access the tunnel. It is inserted into the MPLS
label stack by the local router.
Peer VC Label MPLS label that is used by this router to identify or access the tunnel. It is inserted into the MPLS
label stack by the peer router.
Signaling Protocol Protocol used by MPLS to build the tunnel, for example, LDP or TDP.