Filter
Top Products
27-5
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 27 Monitoring Cable Technologies
User Roles Required to Work with Cable Technologies
Viewing the QAM Domain Configuration Details
To view the QAM domain configuration details:
Step 1 Right-click the required device in Prime Network Vision and choose Inventory.
Step 2 In the logical inventory window, choose Logical Inventory > QAM Domain > QAM Domain name.
The QAM Domain details are displayed north content pane.
Root Server Source The clock source of the DTI server, which can be any one of the following:
• Internal
• External
• GPS
• None
Server Type The type of DTI Server, which can be any one of the following:
• Root
• User Time
• NTPV 4
• GPS
Client Performance
Stable
Indicates the stability of the performance of the DTI client.
Client Cable Advance
Valid
Indicates the cable advance status of the DTI Server Frame.
TOD Setting Mode The output of the Time of Day Setting mode (User time, NTP, GPS), which
can be any one of the following:
• Short
• Ver bo se
Note The output is based on the TOD message sent by the DTI Server.
Time of Day The date and time of the clock.
DTI Client Port Status
DTI Client The name of the DTI client, which when clicked will take you to the relevant
slot under the Physical Inventory node.
DTI Client Status The status of the DTI client, which can be any of the following:
• Active
• Standby
Connected Indicates whether the DTI Server is active in the DTI client port.
Table 27-2 DTI Client Configuration Details (continued)
Field Description