3-25
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 3 Viewing and Managing NE Properties
Working with Ports
Viewing a Port Configuration
In addition to viewing logical inventory information from the logical inventory branch, you can view
services provisioned on physical ports by clicking a physical port in the physical inventory branch.
Information that is displayed includes:
• Physical layer information.
• Layer 2 information, such as ATM and Ethernet.
• Subinterfaces used by a VRF.
You can also perform port configuration tasks such as managing port descriptions, changing port status,
assigning ports to VLANs, and so forth using basic commands that are launched from right-click
contextual menus. The commands are described in Setting Up Devices and Validating Device
Information, page 1-4. That topic also describes commands for configuring interfaces.
To view a port’s configuration:
Step 1 In Cisco Prime Network Vision, double-click the required device.
Step 2 In the inventory window, choose Physical Inventory > Chassis > Slot > Subslot > Port.
Figure 3-9 shows an example of the information (including the subinterfaces) displayed when a port is
selected in the physical inventory branch of the inventory window.
Figure 3-9 Port Information in the Inventory Window