Cisco Systems 4 Video Gaming Accessories User Manual


  Open as PDF
of 1040
 
18-52
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 18 Monitoring MPLS Services
Monitoring MPLS Services
Viewing MPLS TE Tunnel Information
Prime Network Vision automatically discovers MPLS TE tunnels and enables you to view MPLS TE
tunnel information in inventory.
To view MPLS TE tunnel information:
Step 1 Right-click the required device in Prime Network Vision and choose Inventory.
Step 2 In the logical inventory window, choose Logical Inventory > Traffic Engineering Tunnels.
Table 18-28 describes the information that is displayed in the Tunnel Edges table.
Table 18-28 Tunnel Edges Table
Field Description
Name Name of the TE tunnel; for Cisco devices it is the interface name.
Tunnel Type Whether the tunnel is Point-to-Point or Point-to-Multipoint.
Tunnel Destination IP address of the device in which the tunnel ends.
Administrative Status Administrative state of the tunnel: Up or Down.
Operational Status Operational state of the tunnel: Up or Down.
Outgoing Label TE tunnel’s MPLS label distinguishing the LSP selection in the next device.
Description Description of the tunnel.
Outgoing Interface Interface through which the tunnel exits the device.
Bandwidth (KBps) Bandwidth specification for this tunnel in Kb/s.
Setup Priority Tunnel priority upon path setup.
Hold Priority Tunnel priority after path setup.
Affinity Tunnel preferential bits for specific links.
Affinity Mask Tunnel affinity bits that should be compared to the link attribute bits.
Auto Route Whether or not destinations behind the tunnel are routed through the tunnel:
Enabled or disabled.
Lockdown Whether or not the tunnel can be rerouted:
Enabled—The tunnel cannot be rerouted.
Disabled—The tunnel can be rerouted.
Path Option Tunnel path option:
Dynamic—The tunnel is routed along the ordinary routing decisions after
taking into account the tunnel constraints such as attributes, priority, and
bandwidth.
Explicit—The route is explicitly mapped with the included and excluded
links.
Average Rate (Kbps) Average bandwidth for this tunnel (in Kb/s).