Filter
Top Products
24-12
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 24 Monitoring BNG Configurations
Working with BNG Configurations
Viewing the Settings for a PPP Template
In addition to the above details, you can also view the following settings for a PPP template:
• IPCP Settings
• LCP Settings
• Authentication Settings
• PPP Timeout Settings
To view the settings:
Step 1 Right-click on the device and choose the Inventory option.
Step 2 In the Inventory window, choose Logical Inventory > Dynamic Config Templates > PPP template.
A list of templates is displayed in the content pane.
Step 3 Select a template from the list, right-click and choose Properties to view its details. You can click on
the tab to view more details. The IPCP tab is displayed by default.
Table 24-7 describes the fields that are displayed in the corresponding dialog box.
Table 24-7 PPP Template Settings
Field Name Description
DNS Server The IPCP negotiation primary and secondary DNS IP address.
WINS Server The IPCP negotiation primary and secondary WINS IP address.
IPAddress PoolName The IPCP negotiation name of the peer-address pool.
Associated IP Pool
Entity
The associated IP pool entity for the template.
ReNegotiation Enabled Indicates whether the attempts by the peer to renegotiate IPCP is
enabled.
LCP Settings tab
Delay The time period (in seconds or milliseconds) to delay before starting
active LCP negotiations.
ReNegotiation Enabled Indicates whether the attempts by the peer to renegotiate LCP is enabled.
Authentication Settings tab
Authentication Type The PPP link authentication method, which can be any one of the
following:
• chap
• ms-chap
• pap
Chap Host Name The Challenge Handshake Authentication Protocol (CHAP) host name.
MS Chap Host Name The mobile station CHAP host name.
PPP Timeout Settings
Absolute Session
Timeout
The absolute timeout for a PPP session.