Filter
Top Products
25-69
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 25 Monitoring Mobile Technologies
LTE Networks
Viewing the AAA Configuration for Home Agent Service
In order to support Packet Data Serving Node (PDSN), FA, and HA functionality, the system must be
configured with at least one source context and at least two destination contexts as shown in the
following figure.
The source context will facilitate the PDSN service(s), and the R-P interfaces. The AAA context will be
configured to provide foreign/home AAA functionality for subscriber sessions and facilitate the AAA
interfaces.
To view the AAA configuration:
Step 1 In the logical inventory window, choose Logical Inventory > Context > Mobile > Home Agent >
Home agent service > AAA. The AAA configuration details are displayed in the content pane.
Table 25-40 displays the AAA configuration for a home agent service.
Permit Any Hash
Algorithm
Indicates whether verification of MN-HA authenticator using other hash
algorithms is allowed, on failure of the configured hash algorithm.
Note This field is available only in the MN HA SPIs tab.
Description The description of the SPI.
IPSEC Crypto Maps
Map Name The name of the crypto map that is configured in the same context that
defines the IPSec tunnel properties.
Peer FA Address The IP address of the Peer FA to which the IPSEC SA will be established.
Skey Expiry The expiry information of the secret key.
Table 25-39 Home Agent Service Details (continued)
Field Description
Table 25-40 AAA Configuration for Home Agent Service
Field Description
AAA Context The AAA context for the home agent service. Click this link to view the
relevant AAA context.
AAA Accounting Indicates whether the Home Agent can send AAA accounting information
for subscriber sessions.
AAA Accounting
Group
The AAA Accounting group for the Home agent service.
AAA Distributed MIP
Keys
Indicates the usage of AAA distributed MIP keys for authenticating RRQ for
WiMax HA calls.
DMU Refresh Key Indicates whether the Home Agent is allowed to retrieve the MN-HA key
again from the AAA during the call and use this freshly retrieved key value
to recheck authentication.
IMSI Authentication Indicates whether MN-AAA or MN-FAC extensions are present in the RRQ.