Filter
Top Products
10-22
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 10 Working with Reports
Generating Reports
Generating Reports
You can generate reports in any of the following ways:
• Generating Reports from Report Manager, page 10-23
• Generating Reports from the Reports Menu, page 10-37
• Generating Reports from Prime Network Vision, page 10-38
You can generate reports only for devices that are within your scope.
Note Report Manager generates reports up to 150 MB in size. If you generate a report that exceeds this limit:
• Report Manager window displays Failed in the State column.
• An error message is entered in the log stating that the report failed because the resulting output is
too large.
To run the report successfully, enter more specific report criteria or limit the time period covered by the
report.
Database Load and Report Generation
If you generate reports while Prime Network Vision is working under a database load, the reports move
to a Load mode which is indicated by a system event. While Prime Network Vision is in Load mode, the
reports currently running are cancelled and new reports are queued.
After Prime Network Vision returns to normal operation and is no longer operating under a load, a new
system event is generated and the queued reports start running.
Report Generation Failure
If a report fails to generate successfully, the State column contains the word Failed. Click Failed to view
the reason for the failure. A window is displayed with the cause of the failure, such as The disk space
allocated for report storage is full or AVM 84 was restarted while the report was running.
VPLS Summary For each VPLS or H-VPLS instance in the report:
• VPLS or H-VPLS name
• Business tag assigned to the VPLS or H-VPLS instance
• Maps containing the VPLS or H-VPLS instance
You can filter report content by specifying part or all of the:
• VPLS or H-VPLS name
• Business tag
• Map name
Fault
Database
Table 10-16 Standard Network Service Report Types (continued)
Report Name Description Data Source