25-33
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 25 Monitoring Mobile Technologies
GPRS/UMTS Networks
Step 2 In the logical inventory window, choose Logical Inventory > Context > Mobile > SGSN. The SGSN
services configured in Prime Network are displayed in the content pane as shown in the following figure.
Step 3 Under the SGSN node, choose an SGSN service. The SGSN service details are displayed in the content
pane.
Table 25-19 describes the SGSN service details.
Table 25-19 SGSN Service Details
Field Description
Service Name The unique name of the SGSN service.
Note You can configure only one SGSN service for a chassis.
Status The status of the SGSN service, which can be any of the following:
• Unknown
• Initiated
• Running
• Down
• Started
• Not Started
SGSN Number The phone number that is associated with the SGSN service.
Core Network ID The network code that identifies the core network tp connect the SGSN
service.