Filter
Top Products
4-58
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 4 Device Configurations and Software Images
Compliance Audit
Figure 4-15 Policy Profile Page
Follow the procedure below to create a new policy profile:
Step 1 From the left navigation pane, click the Create New Policy Profile icon. Enter name and description of
the policy profile.
Step 2 Choose a policy profile from the left navigation pane. From the Compliance Policy Selector pane, click
the Add Compliance Policy icon. The list of policies appear. Choose the required policies.
Step 3 After you choose the policies, select the rules within the selected which you want to audit against. Later,
if applicable, enter values for rule inputs. The option to enter rule inputs is available only if you entered
input parameters when you created a new rule.
Policy Profiles are created and an audit job can be run.
Auditing Devices
After you create a policy profile, you must choose the devices on which it has to be run. After you choose
the devices and schedule an audit, a job with the name of the policy profile name is created. This name
defines this job, and can be scheduled periodically. This job name is editable.
Step 1 After you have created the profiles, click the Run Compliance Audit icon.
The Select Devices window appears.
Step 2 Select the devices which you wish to audit. Click Next.
1 Create Policy Profile icon 3 Run Compliance Audit icon
2 Edit Policy Profile Description icon 4 Add Compliance Policy icon