Filter
Top Products
18-29
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 18 Monitoring MPLS Services
Monitoring MPLS Services
IPv6 Tab
Export Route Targets IPv6 export route targets contained by the VRF.
Import Route Targets IPv6 import route targets contained by the VRF.
Route Maps Route maps for the VRF.
Routing Tables
Destination Destination of the specific network.
Prefix Length Length of the network prefix in bits.
Next Hop Next routing hop.
Outgoing Interface Name of the outgoing interface; displayed if the Routing Protocol type is
local.
Type Route type: Direct (local), Indirect, or Static.
Routing Protocol Routing protocol used to communicate with the other sites and VRFs: BGP
or local.
BGP Next Hop Border Gateway Protocol (BGP) next hop. This is the PE address from
which to continue to get to a specific address. This field is empty when the
routing entry goes to the CE.
Bottom In Label Innermost label that is expected when MPLS traffic is received.
Bottom Out Label Innermost label sent with MPLS traffic.
Outer Label Outermost or top label in the stack used for MPLS traffic.
MRoute_Table
Source Address The source IP address from where the multicast information is sent.
Group Address The group IP address of the multicast.
Flags The flag information pertaining to the multicast.
Up Time The amount of time the interface has been active.
Protocol The protocol information, which can be 4 or 6.
Sites Tab
Name Site name.
IP Address IP address of the interface.
Mask Subnet mask.
State State of the subinterface: Up or Down.
Associated Entity Element and interface associated with the site, hyperlinked to its entry in
physical inventory.
Description Interface description.
Input Access List Access list applied to the inbound traffic.
Output Access List Access list applied to the outbound traffic.
Table 18-9 VRF Properties (continued)
Field Description