Filter
Top Products
26-44
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 26 Monitoring Data Center Configurations
Viewing the Storage Area Network Support Details
Note For more information about the other sections in this window, see Table 26-14.
Viewing the Fibre Channel Link Aggregation
To view the Fiber Channel Link Aggregation details:
Step 1 In Prime Network Vision, right-click the required device and choose the Inventory option.
Step 2 In the Inventory window, expand the Logical Inventory node.
Step 3 Select the Fibre Channel Link Aggregation option. The list of aggregations are displayed in the content
pane.
Step 4 Double-click on an aggregation. The Fibre Channel Link Aggregation Properties window is displayed
as shown in Figure 26-15.
Allowed VLANs The list of the VLANs allowed on this VLAN interface.
TenGigabit Ethernet
MAC Address The MAC address.
Ethernet LMI Enabled Indicates whether the Ethernet Local Management Interface (LMI) is
enabled.
Discovery Protocols
Discovery Protocol
Type
The type of discovery protocol, which can be CDP or LLDP.
Info Displays more information about the protocol type, which can be any
one of the following:
• for CDP—Up or Down
• for LLDP—Tx (Enabled/Disabled) or Rx (Enabled/Disabled)
Ethernet CSMA/CD
Admin Status The administrative status of the Ethernet Carrier sense multiple access
with collision detection (CSMA/CD).
Oper Status The operational status of Ethernet CSMA/CD.
Port Type The type of port.
Last Changed The date and time when the ethernet status was last changed.
Maximum Speed The maximum bandwidth.
Port Description The description of the port as defined by the user.
MTU The size of the Maximum Transmission Unit (MTU) for the interface.
Internal Port Indicates whether an internal port is available.
Table 26-15 FCoE Configuration Details (continued)
Field Name Description