Filter
Top Products
1-9
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 1 Setting Up Devices and Using the GUI Clients
Setting Up Devices and Validating Device Information
View Device and VRF Routing Tables and Device Interface Briefs
These commands can be executed on all network elements that run on Cisco IOS software, Cisco IOS
XR software, and Cisco NX OS.
View Interface Briefs and IP Routes
Ping Destinations and VRFs, and View Trace Route from Device
Change Device Syslog Logging Level
These commands can be executed on all network elements that run on Cisco IOS software, Cisco IOS
XR software, Cisco NX OS, and Cisco IOS XE software.
Command Navigation Description
Show > IP Route Logical Inventory > Routing Entities >
Routing Entity > Commands
Displays the device routing
table.
Show > VRF IP route Logical Inventory > VRFs > VRF >
Commands
Displays the routing table of a
selected VRF.
Show > IP >
Interface Brief
NE > Commands Lists all IP interfaces on the
device.
Command Navigation Description
OAM > Trace Route
from Device
NE > Commands Performs a traceroute to a destination address,
showing how many hops were required and how
long each hop takes.
OAM > Ping >
Destination From Device
Pings a specified IP address to see if the
IP address is accessible.
OAM > Traceroute
VRF
1
1. Not applicable for Cisco UBR10K and RFGW10 cards.
Logical Inventory >
VRFs > VRF >
Commands
Performs a traceroute from selected VRF to a
destination address, showing how many hops
were required and how long each hop takes.
OAM > Ping VRF
1
Pings a specified VRF to see if the VRF is
accessible.
Command Navigation Description
Syslog Host
Logging
NE > Commands >
Configuration >
System
Changes the syslog logging level to one of the following:
alerts, critical, debugging, emergencies, errors,
informational, notifications, warnings