Filter
Top Products
8-14
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 8 Tracking Faults Using Prime Network Events
Working with Cisco Prime Network Events
The properties of a selected ticket can be viewed in the Ticket Properties window. For a detailed
description of the Ticket tab properties, see Viewing Ticket Properties, page 8-14.
Viewing Ticket Properties
You can view the properties of a selected ticket in Cisco Prime Network Events by displaying the Ticket
Properties window. To view ticket properties in Cisco Prime Network Events:
Step 1 In the Ticket tab in the Cisco Prime Network Events window, select the required ticket.
Step 2 Choose View > Properties from the main menu. The properties are displayed for the selected ticket,
either in the lower portion of the Cisco Prime Network Events window or in a separate window as shown
in Figure 8-3.
Tab le 8 -18 Tra p Tab
Field Description
Version SNMP version: version-1, version-2c, or version-3.
Community String Community that the device sends in the Protocol Data Unit (PDU).
Error Status Error status: No Error, Too Big, No Such Name, Bad Value, Read Only, and
Gen Err.
Values Table
Translated OID String representation of the OID. For example, 1.3.6 is translated into
iso.org.dod where:
• 1 represents iso.
• 3 represents org.
• 6 represents dod.
Translated Value String representation of the OID value. For example, 1.3 is translated to
iso(1).org.10, or a specific value, such as “down” or “4 days, 20 hours, 32
minutes, 11 seconds.”
OID OID that is not translated. It is a dot notation representation of the OID, such
as 1.3.6.1.4.1.9.
Value Value that is not translated.