Filter
Top Products
24-11
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 24 Monitoring BNG Configurations
Working with BNG Configurations
Table 24-6 Template Properties
Field Name Description
Name The name of the subscriber template.
Template Type The template type, which can be IP Subscriber, PPP or Service based
on the selected template.
Ingress Policy The name of the ingress service policy associated with the subscriber
template. This field is applicable only for IP Subscriber and Service
templates.
Associated Ingress
Policy
The associated ingress policy. Click this hyperlink to view the relevant
node under the Policy Container node. This field is applicable only for
IP subscriber templates.
Egress Policy The name of the egress service policy associated with the subscriber
template. This field is applicable only for IP Subscriber and Service
templates.
Associated Egress
Policy
The associated egress policy. Click this hyperlink to view the relevant
node under the Policy Container node. This field is applicable only for
IP Subscriber and Service templates.
Ingress Access-List The name of the ingress access-list associated with the subscriber
template. This field is applicable only for IP subscriber templates.
Associated
Ingress-ACL Entity
The associated ingress access list. Click this hyperlink to view the
related list in the Access List node. This field is applicable only for IP
subscriber templates.
Egress Access-List The name of the egress access-list associated with the subscriber
template. This field is applicable only for IP subscriber templates.
Associated Egress-ACL
Entity
The associated egress access list. Click this hyperlink to view the related
list in the Access List node. This field is applicable only for IP
subscriber templates.
Mtu The maximum transmission unit for IPv4.
Idle Timeout The idle timeout for the subscriber template in seconds. This field is
applicable only for IP Subscriber and Service templates.
Keep Alive Enabled Indicates whether the Keep alive feature is enabled. This field is
applicable only for PPP templates.
Keep Alive Interval The keep alive interval time in terms of seconds. This field is applicable
only for PPP templates.
Maximum Bad
Authentication Request
The maximum number of authentication failures, which can be any
value between 0 and 10. This field is applicable only for PPP templates.
Maximum
Unacknowledged
Request
The maximum number of unacknowledged configured requests, which
can be any value between 4 and 20. This field is applicable only for PPP
templates.
Maximum Negative
Acknowledgement
The maximum number of consecutive configuration negative
acknowledgements, which can be any value between 2 and 10. This field
is applicable only for PPP templates.