Filter
Top Products
12-25
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 12 Monitoring Carrier Ethernet Services
Working with Ethernet Link Aggregation Groups
Step 3 To view properties for a specific aggregation, double-click the group identifier.
The information that is displayed depends on the type of aggregation:
• For Ethernet Channel aggregations, see Table 12-14.
• For IEEE 802.3 AD aggregations, see Table 12-15.
Table 12-14 LAG Ethernet Channel Properties
Field Description
Group Number Aggregation group number.
Bandwidth Aggregation bandwidth in b/s.
Control Protocol Aggregation control protocol: Manual, Link Aggregation Control Protocol (LACP), or Port
Aggregation Protocol (PagP).
MAC Address Aggregation MAC address.
Administrative State Aggregation administrative status: Up or Down.
Operational State Aggregation operational status: Up or Down.
Adjacent Adjacent group, hyperlinked to the group in logical inventory.
mLACP Properties mLACP properties are displayed if the aggregation group is associated with an ICCP redundancy
group.
ICCP Redundancy
Group
ICCP redundancy group associated with this aggregation group, hyperlinked to the relevant entry
in logical inventory.
mLACP Role Role of the LAG in the redundancy group: Active or Standby.
mLACP Operational
System MAC
MAC address used in a dual-homed environment that is selected by ICCP from one of the
configured system MAC addresses for one of the points of attachment (PoAs).
mLACP Operational
System Priority
Priority used in a dual-homed environment that is selected by ICCP from the configured system
priority on one of the PoAs.
mLACP Failover
Option
Configured mLACP failover mode: Revertive or Nonrevertive.
mLACP Max Bundle Maximum number of links allowed per bundle.
Aggregated Ports Table
ID Aggregated port identifier, hyperlinked to the interface in physical inventory.
Type Aggregation type, such as Layer 2 VLAN.
Mode VLAN mode, such as Trunk.
Native VLAN ID VLAN identifier (VID) associated with this VLAN. The range of VLANs is 1 to 4067.
VLAN Encapsulation
Type
Type of encapsulation configured on the VLAN, such as IEEE 802.1Q.
Allowed VLANs List of VLANs allowed on this interface.
VLAN Encapsulation
Admin Type
VLAN administration encapsulation type, such as IEEE 802.1Q.
Subinterfaces Table
Address IP address of the subinterface.
Mask Subnet mask applied to the IP address.
VLAN Type Type of VLAN, such as Bridge or IEEE 802.1Q.