Filter
Top Products
25-43
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 25 Monitoring Mobile Technologies
LTE Networks
Step 1 Right-click the required device in Prime Network Vision and choose Inventory.
Step 2 In the logical inventory window, choose Logical Inventory > Context > Mobile > SAE-GW Container.
Prime Network Vision displays the list of SAE-GW services configured under the container. You can
view the individual SAE-GW service details from the table on the right pane or by choosing Logical
Inventory > Context > Mobile > SAE-GW Container > SAE-GW.
Table 25-23 describes the details available for each SAE-GW.
SAE-GW Commands
The following commands can be launched from the inventory by right-clicking a SAE-GW and choosing
Commands > Configuration.
The table below lists the SAE-GW commands. Additional commands may be available for your devices.
New commands are often provided in Prime Network Device Packages, which can be downloaded from
the Prime Network software download site. For more information on how to download and install DPs
and enable new commands, see the information on “Adding Additional Device (VNE) support” in the
Cisco Prime Network 4.0 Administrator Guide.
Before executing any commands, you can preview them and view the results. If desired, you can also
schedule the commands. To find out if a device supports these commands, see the Cisco Prime Network
4.0 Supported Cisco VNEs.
Note You might be prompted to enter your device access credentials while executing a command. Once you
have entered them, these credentials will be used for every subsequent execution of a command in the
same GUI client session. If you want to change the credentials, click Edit Credentials. The Edit
Credentials button will not be available for SNMP commands or if the command is scheduled for a later
time.
Table 25-23 SAE-GW Properties in Logical Inventory
Field Description
Service Name Name of the SAE-GW service.
Service ID ID of the SAE-GW service.
Status Status of the SAE-GW service.
P-GW Service The P-GW service associated with the SAE-GW.
S-GW Service The S-GW service associated with the SAE-GW.
New Call Policy Specifies if the new call related behavior of SAE-GW service is enabled or
disabled, when duplicate sessions with same IP address request is received.