Filter
Top Products
25-64
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 25 Monitoring Mobile Technologies
LTE Networks
Viewing the Profile-QCI Mapping Details
You can view the configured mapping entries between a Rendezvous Point (RP) QoS Profile and the LTE
QoS Class Index (QCI).
A QCI is a scalar that is used as a reference to access node-specific parameters that control bearer level
packet forwarding treatment (e.g. scheduling weights, admission thresholds, queue management
thresholds, link layer protocol configuration, etc.), and that have been pre-configured by the operator
owning the access node.
To view the Profile-QCI mapping entries:
Step 1 Right-click the required device in Prime Network Vision and choose Inventory.
Step 2 In the logical inventory window, choose Logical Inventory > local > Mobile > Profile > Profile-QCI
Mapping > Profile-QCI Mapping. The mapping details are displayed in the content pane.
Table 25-37 displays the Profile-QCI Mapping details.
Configuration Commands for MAG
The MAG commands allow you to configure MAG services in your network. Please note that these
commands are available only for Cisco ASR 5000 Mobile devices.
These commands can be launched from the logical inventory by choosing the
Context > Commands > Configuration or Context > Commands > Show.
Before executing any commands, you can preview them and view the results. If desired, you can also
schedule the commands.
Table 25-37 Profile-QCI Mapping Details
Field Description
Profile Name The name of the Profile-QCI Mapping profile that is associated with the
HSGW.
Profile-QCI Mapping Table
QCI ID The QCI ID to which the profile is mapped.
Profile ID The profile ID to which the QCI ID is mapped.
Uplink GBR The Guaranteed Bit Rate (GBR) for the uplink data flow, which can be any
value between 0 and 4294967295.
Downlink GBR The GBR for the downlink data flow, which can be any value between 0 and
4294967295.
Uplink MBR The Maximum Bit Rate (MBR) for the uplink data flow, which can be any
value between 0 and 4294967295.
Downlink MBR The MBR for the downlink data flow, which can be any value between 0 and
4294967295.
Priority Level The priority level of the profile for the QCI, which can be any value between
1 and 15.
Preemption Capability The preemption capability of the profile.