20-60
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 20 Monitoring MToP Services
Configuring Automatic Protection Switching (APS )
You might be prompted to enter your device access credentials while executing a command. Once you
have entered them, these credentials will be used for every subsequent execution of a command in the
same GUI client session. If you want to change the credentials, click Edit Credentials. The Edit
Credentials button will not be available for SNMP commands or if the command is scheduled for a later
time.
Command Navigation Description
Create APS (For ASR9000):
Right-click on the
device > Commands >
Configuration > APS >
(For ASR903):
Physical Inventory > Chassis >
slot > subslot > SONET interface >
Commands > Configuration >
APS >
Adds an APS group with a specified
number and assign a channel for the
APS group. 0 designates a protect
channel, and 1 designates a working
channel.
Modify APS