Filter
Top Products
18-49
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 18 Monitoring MPLS Services
Monitoring MPLS Services
For MPLS-TP BFD sessions, the information in Table 18-24 is displayed.
Step 3 To view additional properties, double-click the required entry in the Sessions table.
Table 18-25 describes the information that is displayed in the Session Properties window.
Viewing Cross-VRF Routing Entries
Cross-VRF routing entries display routing information learned from the BGP neighbors (BGP
knowledge base).
To view properties for cross-VRF routing entries:
Step 1 Right-click the required device in Prime Network Vision and choose Inventory.
Table 18-24 MPLS-TP BFD Session Properties in Logical Inventory
Field Description
Process Process name: Bidirectional Forwarding Detection.
Process State Process state, such as Running.
MPLS-TP BFD Sessions Table
Interface Interface used for BFD communications, hyperlinked to the routing
entity in logical inventory.
LSP Type Type of LSP: Working or Protected.
State Session state: Up or Down.
Registered Protocols Routing protocol being monitored for communication failures:
MPLS-TP.
Interface Name
Table 18-25 Session Properties Window
Field Description
Source IP Source IP address of the session.
Destination IP Destination IP address of the session.
State Session state: Up or Down.
Interface Hyperlink to the routing entity in logical inventory.
Registered Protocols Routing protocol being monitored for communication failures.
Protocols Table
Protocol Protocol used for this session.
Interval Length of time (in milliseconds) to wait between packets that are
sent to the neighbor.
Multiplier Number of times a packet is missed before the neighbor is declared
down.