20-51
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 20 Monitoring MToP Services
Viewing CEM and Virtual CEM Properties
Viewing CEM Groups on Physical Interfaces
When you configure a CEM group on a physical interface, the CEM group properties are displayed in
physical inventory for that interface.
To view CEM groups configured on physical interfaces:
Step 1 In Prime Network Vision, double-click the required device.
Step 2 In the inventory window, choose Physical Inventory > Chassis > slot > subslot > interface.
The CEM group information is displayed in the content pane with other interface properties
(Figure 20-26).
Figure 20-26 CEM Group Information
See Table 20-22 for a description of the properties displayed for CEM groups in the content pane.
Step 3 To view additional information, double-click the required group.
The CEM Group Properties window is displayed as shown in Figure 20-27.