Cisco Systems 4 Video Gaming Accessories User Manual


  Open as PDF
of 1040
 
12-112
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 12 Monitoring Carrier Ethernet Services
Viewing IP SLA Responder Service Properties
Viewing IP SLA Responder Service Properties
Cisco IOS Service Level Agreements (SLAs) software allows you to analyze IP service levels for IP
applications and services by using active traffic monitoring to measure network performance.
The IP SLA responder is a component embedded in the destination Cisco device that allows the system
to anticipate and respond to IP SLAs request packets. The responder provides accurate measurements
without requiring dedicated probes. The responder uses the Cisco IOS IP SLAs Control Protocol to
provide a mechanism through which it can be notified on which port it should listen and respond.
Two-Way Active Measurement Protocol (TWAMP) defines a standard for measuring round-trip network
performance between any two devices that support the protocol.
Prime Network Vision supports IP SLA Responder service on the following devices:
Cisco 3400ME and 3750ME devices running Cisco IOS 12.2(52)SE.
Cisco MWR2941 devices running Cisco CSR 3.2.
To view IP SLA Responder service properties:
Step 1 In Prime Network Vision, double-click the device configured for IP SLA Responder service.
Step 2 In the inventory window, choose Logical Inventory > IP SLA Responder.
IP SLA Responder properties are displayed as shown in Figure 12-72.
Network VLANs Tab
Name VLAN name.
ID VLAN identifier.
EFD Name Name of the Ethernet flow domain.
EFD System Name Name that Prime Network Vision assigns to the EFD.
System Name VLAN system name.
Description Brief description of the VLAN.
Network Pseudowires Tab
Name Pseudowire name.
System Name System on which the pseudowire is configured.
Description Brief description of the pseudowire.
Pseudowire Type Type of pseudowire.
Is Multisegment Pseudowire Whether or not the pseudowire is multisegment: True or False.
VPLS Instances Tab
Name VPLS instance name.
System Defined Name Name that Prime Network Vision assigns to the VPLS instance.
VPN ID Identifier of associated VPN.
Table 12-45 EVC Properties Window (continued)
Field Description