Filter
Top Products
26-43
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 26 Monitoring Data Center Configurations
Viewing the Storage Area Network Support Details
Viewing the FCoE Interface Details
To view the FCoE Interface details:
Step 1 In Prime Network Vision, right-click the required device and choose the Inventory option.
Step 2 In the Inventory window, expand the Physical Inventory node.
Step 3 Select Chassis > Fixed Slot > FCoE interface. The FCoE interface details are displayed in the content
pane. The following information is displayed in the content pane:
Table 26-15 describes the FCoE configuration details.
RxB2B Credit The Receive Buffer to Buffer Credit value for the fibre channel. This
value is configured for each interface.
Admin Status The administrative status of the fibre channel, which can be any one of
the following:
• Up
• Down
Oper Status The operational status of the fibre channel, which can be any one of the
following:
• Up
• Down
Port WWN The World Wide Name (WWN) of the port for the Fibre Channel.
Table 26-14 FC Configuration Details (continued)
Field Name Description
Table 26-15 FCoE Configuration Details
Field Name Description
VLAN Interface tab
Mode The VLAN interface configuration mode, which can be any one of the
following:
• Unknown
• Access
• Dynamic Auto
• Dynamic Desirable
• Trunk
• Dot 1Q Tunnel
VLAN Type The VLAN interface type, such as Layer 2 VLAN.
Native VLAN ID VLAN Identifier (VID) associated with this VLAN. The range of the
VLAN ID is 1 to 4067.