Filter
Top Products
25-62
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 25 Monitoring Mobile Technologies
LTE Networks
Viewing the MAG Configuration for HSGW
A Mobile Access Gateway (MAG) performs mobility-related signaling on behalf of the mobile nodes
(MN) attached to its access links. MAG is the access router for the MN; that is, the MAG is the first-hop
router in the localized mobility management infrastructure
A MAG performs the following functions:
• Obtains an IP address from a Local Mobility Anchor (LMA) and assigns it to an MN
• Retains the IP address of an MN when the MN roams across MAGs
• Tunnels traffic from an MN to LMA
To view the MAG configuration details:
Create SPI Expand HSGW node > right-click HSGW
service > Commands > Configuration
Use this command to create a new
Security Parameter Index (SPI) for the
HSGW service.
Modify SPI
Delete SPI
Expand HSGW node > HSGW service >
In content pane, click SPI tab >
right-click on SPI No. field > Commands
> Configuration
Use this command to modify/delete
the SPI configuration details for the
HSGW service.
Create PLMN
entries
Expand HSGW node > right-click HSGW
service > Commands > Configuration
Use this command to create a new
Public Land Mobile Network (PLMN)
for the HSGW service.
Modify PLMN
entries
Delete PLMN
entries
Expand HSGW node > HSGW service >
In content pane, click PLMN tab >
right-click on PLMN ID field >
Commands > Configuration
Use this command to modify/delete
the PLMN configuration details for the
HSGW service.
Create Overload
Policy
Expand HSGW node > right-click HSGW
service > Commands > Configuration
Use this command to create a new
overload policy for the HSGW service.
Modify Overload
Policy
Delete Overload
Policy
Expand HSGW node > HSGW service >
In content pane, click Overload Policies
tab > right-click on IP address field >
Commands > Configuration
Use this command to modify/delete
the overload policy details for the
HSGW service.
Modify A10 A11
Interface
Expand HSGW node > HSGW service >
Right-click A10/A11 Properties >
Commands > Configuration
Use this command to modify the
A10/A11 configuration details for the
HSGW service.
Modify GRE Expand HSGW node > HSGW service >
right-click GRE > Commands >
Configuration
Use this command to modify the GRE
configuration details for the HSGW
service.
Modify IP Source
Violation
Expand HSGW node > HSGW service >
right-click IP Source Violation >
Commands > Configuration
Use this command to modify the IP
source violation details for the HSGW
service.
Table 25-35 HSGW Configuration Commands (continued)
Command Navigation Description