Filter
Top Products
18-43
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 18 Monitoring MPLS Services
Monitoring MPLS Services
Viewing the MLDP Neighbors Information
To view information of MLDP neighbors:
Step 1 Double-click the required device in Prime Network Vision.
Step 2 In the logical inventory window, choose Logical Inventory > LSEs > Label Switching > Multicast
Label Switching > MLDP Neighbors. The MLDP peer information is displayed in the MLDP Peers
content pane.
Step 3 Select a peer id from the content pane, right-click and choose the Properties option. The Peer ID
Properties dialog box is displayed.
Table 18-20 describes the information that is displayed for Peer ID Properties dialog box.
Table 18-19 MLDP Database Properties Dialog Box
Field Description
LSM ID The unique ID assigned to a LSP.
Tunnel Type The tunnel type.
FEC Root The root IP address of the MDT.
Opaque Value The stream information that uniquely identifies the tree to the root.
To receive label switched multicast packets, the Egress Provider
Edge (PE) indicates to the upstream router (the next hop closest to
the root) which label it uses for the multicast source by applying the
label mapping message.
Is Root Indicates whether Forwarding Equivalence Class (FEC) is the root.
Downstream Clients Tab
Egress Interface Name The egress interface name.
Associated Entity The entity associated with the LSP. Click this link to view the
associated entity details.
Uptime The amount of time from when the interface is active.
Table ID The unique Table ID of the label through which the packet was
received.
Ingress State The status of the ingress interface, which can be Enabled or
Disabled.
PPMP State The status of the Point-to-Point Multipoint, which can be Enabled
or Disabled.
Local Label The label used to identify the label stack of the route within the local
VPN network.