Filter
Top Products
25-79
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 25 Monitoring Mobile Technologies
LTE Networks
Viewing the Proxy Mobile IP Configuration Details
To view the Proxy Mobile IP configuration details for a foreign agent:
Step 1 Right-click the required device in Prime Network Vision and choose Inventory.
Step 2 In the logical inventory window, choose Logical Inventory > Context > Mobile > FA > FA
service > Proxy Mobile IP. The details are displayed in the content pane.
Table 25-49 displays the Proxy Mobile IP configuration details.
Crypto Map Name The IKE crypto map for the peer home agent.
SPI
SPI Number The unique SPI number that indicates a security context between the
services. This number can be any value between 256 and 4294967295.
Remote Address The IP address of the source service, which is expressed either in the IPv4
dotted decimal notation or IPv6 colon separated notation.
Hash Algorithm The hash algorithm used between the source and destination services.
Time Stamp Tolerance The acceptable time difference (in seconds) in timestamps, which can be any
value between 0 and 65535.
Note If the actual timestamp difference exceeds the value here, then the
session is rejected. If this value is 0, then the timestamp tolerance
checking is disabled at the receiving end.
Replay Protection The replay protection scheme that is implemented by the service.
Description The description of the SPI.
Net Mask The net mask for the IP address of the SPI. This field defaults to
255.255.255.255.
HA Monitor Indicates whether HA monitoring is enabled.
Table 25-48 HA Configuration Details (continued)
Field Description
Table 25-49 Proxy Mobile IP Configuration Details
Field Description
Proxy MIP Indicates the status of the Proxy Mobile IP.
Encapsulation Type The data encapsulation type to be used in PMIP call for specific FA services,
which can be any one of the following:
• IPIP
• GRE
This field defaults to IPIP.