Filter
Top Products
25-31
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 25 Monitoring Mobile Technologies
GPRS/UMTS Networks
Viewing eGTP Properties
Prime Network Vision displays the EGTPs in an EGTP container under the Mobile node in the logical
inventory. The icon used for representing EGTPs in the logical inventory is explained in Logical
Inventory Icons, page A-7.
To view EGTP properties:
Step 1 Right-click the required device in Prime Network Vision and choose Inventory.
Step 2 In the logical inventory window, choose Logical Inventory > Context > Mobile > EGTP Container.
Prime Network Vision displays the list of EGTPs configured under the container. You can view the
individual EGTP details from the table on the right pane or by choosing Logical
Inventory >Context > Mobile > EGTP Container > EGTP.
Table 25-17 describes the details available for each EGTP.
eGTP Commands
The following commands can be launched from the inventory by right-clicking an EGTP and choosing
Commands > Configuration.
The table below lists the EGTP commands. Additional commands may be available for your devices.
New commands are often provided in Prime Network Device Packages, which can be downloaded from
the Prime Network software download site. For more information on how to download and install DPs
and enable new commands, see the information on “Adding Additional Device (VNE) support” in the
Cisco Prime Network 4.0 Administrator Guide.
Table 25-17 EGTP Properties in Logical Inventory
Field Description
Service Name Name of the EGTP service.
Status Status of the EGTP service.
Message Validation
Mode
Mode of message validation for the EGTP service.
Interface Type Interface type for the EGTP service.
Restart Counter Restart counter value for the EGTP service.
GTPC Retransmission
Timeout
Control packet retransmission timeout for the EGTP service.
GTPC Max Request
Retransmissions
Maximum number of request retransmissions for the EGTP service.
GTPC IP QoS DSCP
Value
The IP QoS DSCP value for the EGTP service.
GTPC Echo Indicates whether GTPC echo is configured for the EGTP service or not.
GTPC Echo Interval GTPC echo interval for the EGTP service.
GTPC Echo Mode GTPC echo mode, which could be Dynamic or Default.
GTPC Smooth Factor Smooth factor used in the dynamic echo timer for the EGTP service.