Filter
Top Products
25-137
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 25 Monitoring Mobile Technologies
Working with Active Charging Service
Table 25-85 Active Charging Services Configuration Commands
Command Navigation Description
Create
Ruledef
Expand Active Charging
Services node >
right-click ACS service >
Commands >
Configuration
Rule definitions (Ruledefs) are user-defined expressions,
based on protocol fields and/or protocol-states, which
define what actions to take when specific field values are
true.
Use this command to create a new rule definition for the
selected ACS service.
Create group
of Ruledefs
Expand Active Charging
Services node >
right-click ACS service >
Commands >
Configuration
Group-of-Ruledefs enable grouping ruledefs into
categories. When a group-of-ruledefs is configured in a
rulebase, if any of the ruledefs within the group matches,
the specified charging-action is performed, any more
action instances are not.
Use this command to create a new group of rule
definitions for the selected ACS service.
Create
Rulebase
Expand Active Charging
Services node >
right-click ACS service >
Commands >
Configuration
A rulebase is a collection of ruledefs and their associated
billing policy. The rulebase determines the action to be
taken when a rule is matched.
Use this command to create a new rule base for the
selected ACS service.
Modify
Active
Charging
Service
Delete Active
Charging
Service
Expand Active Charging
Services node >
right-click ACS service >
Commands >
Configuration
Use these commands to modify/delete an Active Charging
service created for the selected context.
Create
Access
Ruledef
Delete Access
Ruledef
Expand Active Charging
Services node >
right-click ACS service >
Commands >
Configuration > Access
Ruledef
Use these commands to create/delete an access rule
definition for the selected ACS service.
Show Access
Ruledef
Expand Active Charging
Services node >
right-click ACS service >
Commands > Show
Use this command to view and confirm the access rule
definitions configured for the service.
Create Host
Pool
Modify Host
Pool
Delete Host
Pool
Expand Active Charging
Services
node >
right-click ACS service >
Commands >
Configuration > Host
Pool
Host pools allow operators to group a set of host or IP
addresses that share similar characteristics together.
Access rule definitions (ruledefs) can be configured with
host pools. Up to ten sets of IP addresses can be
configured in each host pool.
Use these commands to create/modify/delete a host pool
for the selected ACS service.