Filter
Top Products
25-136
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 25 Monitoring Mobile Technologies
Working with Active Charging Service
Viewing Fair Usage Properties
To view fair usage properties configured for the ACS:
Step 1 Right-click the required device in Prime Network Vision and choose Inventory.
Step 2 In the logical inventory window, choose Logical Inventory > local > Mobile > Active Charging
Services > ACS > Fair Usage.
Prime Network Vision displays the details on the content pane.
Table 25-84 describes the fair usage properties.
ACS Commands
The following commands can be launched from the inventory by right-clicking an ACS and choosing
Commands > Configuration or Commands > Show. Before executing any commands, you can
preview them and view the results. If desired, you can also schedule the commands. To find out if a
device supports these commands, see the Cisco Prime Network 4.0 Supported Cisco VNEs.
The table below lists the ACS commands. Additional commands may be available for your devices. New
commands are often provided in Prime Network Device Packages, which can be downloaded from the
Prime Network software download site. For more information on how to download and install DPs and
enable new commands, see the information on “Adding Additional Device (VNE) support” in the Cisco
Prime Network 4.0 Administrator Guide.
Note You might be prompted to enter your device access credentials while executing a command. Once you
have entered them, these credentials will be used for every subsequent execution of a command in the
same GUI client session. If you want to change the credentials, click Edit Credentials. The Edit
Credentials button will not be available for SNMP commands or if the command is scheduled for a later
time.
Table 25-85 lists the Active Charging Services configuration commands.
Table 25-84 Fair Usage Properties in Logical Inventory
Field Description
CPU Threshold Percent Percentage of system CPU resources that the dynamic inline transrating
feature is allowed to use.
Threshold Percent Percentage of system resources that the dynamic inline transrating feature is
allowed to use.
Deactivate Margin
Percent
Fair usage deactivate margin, below which monitor action is disabled.