Filter
Top Products
24-9
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 24 Monitoring BNG Configurations
Working with BNG Configurations
View Dynamic Config Templates
A dynamic template is used to group configuration items, which are later applied to a group of
subscribers. This template is globally configured through the command line interface (CLI). However,
the template does not get applied to a subscriber interface as soon as it is configured. It must be activated
using a control policy. Similarly, you must deactivate the template using a control policy to remove its
association with the subscriber interface.
Ideally, you can activate more than one dynamic template on the same subscriber interface, for the same
event or different events. The same dynamic-template can be activated on multiple subscriber interfaces
through the same control policy.
Table 24-5 DHCP Profile Properties
Field Name Description
Profile Name The name of the DHCP profile.
Profile Type The network protocol that the profile belongs to. The profile type can be
IPV4 or IPV6.
Agent Mode The DHCP agent mode, which can be Relay, Snoop or Proxy.
Lease Limit The lease limit for the profile.
Lease Limit Type The lease limit type.
Relay Information
Check
Indicates whether the relay information check is enabled or disabled.
Relay Information
Policy
The relay information policy.
DHCP Agent Information Options
Option The relay agent information options key parameter.
Value The value of the relay agent information options.
Applied Interfaces
Interface Name The name of the interface applied to the DHCP Group.
Entity Association The link to the applied interface. Click this hyperlink to view the
relevant node under the Subscriber Access Point node.
DHCP Servers
Profile Class The profile class.
Server Address The IP address of the profile, which is used to relay packets.
VRF The VRF of the DHCP profile. Click this hyperlink to view the relevant
node under the VRFs node.
Gateway Address The IP address of the gateway.
Match Option The match option of the DHCP profile.
Match Option Value The value of the match option.
Match Option Mask The match option mask.