Filter
Top Products
25-39
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 25 Monitoring Mobile Technologies
GPRS/UMTS Networks
Step 2 In the logical inventory window, choose Logical Inventory > Context > Mobile > SGSN > NRI
Properties. The NRI properties are displayed in the content pane.
Table 25-21 describes the NRI Properties details.
Session Management Properties
To view the Session Management properties for an SGSN service:
Step 1 Right-click the required device in Prime Network Vision and choose Inventory.
Step 2 In the logical inventory window, choose Logical Inventory > Context > Mobile > SGSN > Session
Management Properties. The Session Management properties are displayed in the content pane.
Table 25-22 describes the Session Management Properties details.
Table 25-21 NRI Properties Details
Field Description
NRI Length The number of bits to be used in P-TMSI to define the NRI, which can be
any number between 1 and 6. This length also determines the maximum size
of the pool. If you do not configure a length for the NRI, then the default
value of zero is considered to be the NRI’s length.
NRI Null Value The value of the null NRI, which is unique across all pool areas. If the NRI
null value is 0, it indicates that the keyword is not used. Any value between
1 and 63 is used to identify the SGSN service that is to be used for offloading
procedure for SGSN pooling.
Non Broadcast MCC The country code of the mobile, whic is basically the first part of the PLMN
ID. This code can be any value between 100 and 999.
Non Broadcast MNC The network code portion of the PLMN ID. This code must be a 2 or 3 digit
value between 1 and 999.
Non Broadcast LAC The location area code associated with an RNC. This code must be any value
between 1 and 65535.
Non Broadcast RAC The remote area code associated with an RNC. This code can be any value
between 1 and 255.
Table 25-22 Session Management Properties Details
Field Description
Max Activate Retries The maximum number of retries to activate PDP context, which can be any
value between 1 and 10.
Max Modify Retries The masimum number of retries to modify the PDP context, which can be
any value between 1 and 10.
Max Deactivate Retries The maximum number of retries to deactivate PDP context, which can be any
value between 1 and 10.