Filter
Top Products
15-13
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 15 Monitoring Ethernet Operations, Administration, and Maintenance Tool Properties
Viewing Ethernet LMI Properties
Step 4 To view properties for an Ethernet LMI interface in physical interface, click the required interface name
in the ELMI Interfaces table.
Table 15-10 describes the information displayed in the UNI Properties area in physical inventory.
Table 15-9 Device EVC Properties in Logical Inventory
Field Description
EVC Name Name of the EVC.
EVC Type Type of EVC: Point-to-point or Multipoint.
EVC Status EVC status: Active, Inactive, Not Defined, or Partially Active.
Maintenance Association Hyperlinked entry to the maintenance association in CFM in logical
inventory. For more information about maintenance associations, see
Table 15-6.
Active Remote UNI Count Number of active remote UNIs.
Configured Remote UNI
Count
Number of configured remote UNIs.
UNI Interfaces Table
UNI Id UNI identifier.
UNI Status Status of the UNI: Up or Down.
LMI Link Status Status of the LMI link: Up or Down.
Interface Name Interface on which UNI is configured.
Is UNI Local Whether or not UNI is local: True or False.
Local Interface Hyperlinked entry to the interface in physical inventory.
VLAN List Name of the VLAN associated with the UNI interface.
Table 15-10 Ethernet LMI UNI Properties in Physical Inventory
Field Description
Service Multiplexing Enabled Whether or not the interface is configured for UNI
multiplexing: True or False.
Bundling Enabled Whether or not the interface is configured for UNI bundling:
True or False.
UNI Id UNI identifier.
Bundling Type Type of bundling applied: All-to-One or None.
This field appears only when a bundling type is set.