Filter
Top Products
25-48
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 25 Monitoring Mobile Technologies
LTE Networks
Note You might be prompted to enter your device access credentials while executing a command. Once you
have entered them, these credentials will be used for every subsequent execution of a command in the
same GUI client session. If you want to change the credentials, click Edit Credentials. The Edit
Credentials button will not be available for SNMP commands or if the command is scheduled for a later
time.
Viewing QoS Class Index to QoS (QCI-QoS) Mapping
The QoS Class Index (QCI) to QoS mapping configuration mode is used to map Dices to enforceable
QoS parameters. Mapping can occur between the RAN and the S-GW, the MME, and/or the P-GW in an
LTE network or between the RAN and the harped Serving Gateway (HSGW) in an eHRPD network. This
is a global configuration. These maps can be imported by P-gateway and S-gateway to enforce these
parameters on upstream/downstream traffic.
Prime Network Vision displays the QCI-QoS mapping information under the Mobile node in the logical
inventory. See Figure 25-18.
Note QCI-QoS mapping is applicable only for the ‘local’ context in the logical inventory.
To view QCI-QoS mapping:
Step 1 Right-click the required device in Prime Network Vision and choose Inventory.
Step 2 In the logical inventory window, choose Logical Inventory > local > Mobile > QCI-QoS Mapping.
Prime Network Vision displays the list of QCI-QoS mapping records configured under the container.
You can view the individual record from the table on the right pane or by choosing Logical
Inventory >Context > Mobile > QCI-QoS Mapping > Mapping Name.
Table 25-29 describes the QCI-QoS mapping details.
Table 25-28 S-GW Commands
Command Navigation Description
Create S-GW PLMN Right-click on a
S-GW service >
Commands >
Configuration
Use this command to create a PLMN for
S-GW.
Delete S-GW Use this command to delete a S-GW.
Modify S-GW Use this command to modify the
configuration details for a S-GW.
Table 25-29 QCI-QoS Mapping
Field Description
Mapping Name Name of the QCI-QoS mapping record.
QCI-QoS Mapping Table
QCI Number QCI number.
QCI Type QCI type.