Filter
Top Products
Send documentation comments to mdsfeedback-doc@cisco.com.
3-12
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-6965-03, Cisco MDS SAN-OS Release 2.x
Chapter 3 Fabric Manager Client
Using Fabric Manager Client
Note You can launch web-based or non-web-based applications from the Fabric pane. To do this, you assign
an IP address to the storage port or enclosure. Then right-click to bring up the pop-up menu, and select
Device Manager.
Filtering
Fabric Manager has a built-in filtering mechanism that displays only the data you are interested in. To
filter, first select the fabric, and VSAN from the Logical Domains pane. This narrows the scope of what
is displayed in the Fabric pane. Any information that does not belong to the selected items is dimmed.
Also, any information that does not belong to the selected items is not displayed in the tables in the
Information pane. As shown in Figure 3-3, the filter you select is displayed at the top right of the Fabric
Manager window.
To further narrow the scope, select attributes from the Physical Attributes pane. The Fabric Manager
tables, display, and filter criteria change accordingly.
Figure 3-3 Fabric Manager’s Filtering Mechanism