Filter
Top Products
Send documentation comments to mdsfeedback-doc@cisco.com.
36-22
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-6965-03, Cisco MDS SAN-OS Release 2.x
Chapter 36 Management Software Troubleshooting
Other
Manually specifying an interface for Fabric Manager Client or Device Manager
To specify an interface for the Fabric Manager Client or Device Manager, follow these steps:
Step 1 Go to the MDS 9000/bin folder. On a Windows platform, this folder is at C:\Program Files\Cisco
Systems\MDS 9000 by default.
Step 2 Edit the DeviceManager.bat file or the FabricManager.bat file.
Step 3 Scroll to the line that begins with set JVMARGS=
Step 4 Add the parameter -Device Managerds.nmsaddress=ADDRESS, where ADDRESS is the IP address or
interface name of the NIC you want to use.
Step 5 Save the file and relaunch Fabric Manager Client or Device Manager.
How can I configure an HTTP proxy server?
If your network uses a proxy server for HTTP requests, make sure the Java Web Start Application
Manager is properly configured with the IP address of your proxy server.
To configure a proxy server in the Java Web Start Application Manager, follow these steps:
Step 1 Launch the Java Web Start application.
Step 2 Select File > Preferences from the Java WebStart Application Manager.
Step 3 Click the Manual radio button and enter the IP address of the proxy server in the HTTP Proxy field.
Step 4 Enter the HTTP port number used by your proxy service in the HTTP Port field.
Step 5 Click OK.