Filter
Top Products
Send documentation comments to mdsfeedback-doc@cisco.com.
3-3
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-6965-03, Cisco MDS SAN-OS Release 2.x
Chapter 3 Fabric Manager Client
Using Fabric Manager Client
Using Fabric Manager Client
This section describes the Fabric Manager client interface, as shown in Figure 3-1.
Figure 3-1 Fabric Manager Main Window
1 Menu bar—Provides access to options that are organized by menus.
2 Toolbar—Provides icons that provide direct access to the most commonly used options on the
File, Tools, and Help menus.
3 Information pane—Displays information about whatever option is selected in the menu tree.
4 Status Bar (right side)—Shows the last entry displayed by the discovery process, and the possible
error message.
5 Fabric pane—Displays a map of the network fabric, including switches, hosts, and storage. It also
provides tabs for displaying log and event data.
6 Logical domains—Displays a tree of configured SAN, fabrics, VSANs and zones.
Note Fabric Manager Release 2.1(2) or later displays all fabrics under one SAN.
7 Physical attributes—Displays a tree of available configuration tasks depending on the fabric,
VSAN, or zone selected above. Lists the switches and end devices in the logical selection.
8 Status Bar (left side)—Shows short-term transient messages, such as the number of rows
displayed in a table.