Filter
Top Products
Send documentation comments to mdsfeedback-doc@cisco.com.
10-10
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-6965-03, Cisco MDS SAN-OS Release 2.x
Chapter 10 Software Images
File System Manipulation
Step 6 Click the ... button to browse for the source file on your local PC or on the server, depending on the type
of copy.
Note If you are copying from Flash, the file name must be of the form
[device>:][<partition>:]<file>
where <device> is a value obtained from FlashDeviceName,
<partition> is a value obtained from FlashPartitionName and
<file> is the name of a file in Flash.
Step 7 Enter the destination name for the file.
Note If you are copying to Flash, the file name must be of the form
[device>:][<partition>:]<file>
where <device> is a value obtained from FlashDeviceName,
<partition> is a value obtained from FlashPartitionName and
<file> is any character string that does not have embedded colon characters.
Step 8 Click Apply.
Performing Other File Manipulation Tasks
To perform the following CLI-specific tasks, refer to the Cisco MDS 9000 Family Configuration Guide:
• Displaying file contents
• Displaying the last line in a file
• Saving output to a file
• Moving files
• Compressing and uncompressing files
• Executing commands specified in a script
• Setting the delay time