Filter
Top Products
Send documentation comments to mdsfeedback-doc@cisco.com.
23-14
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-6965-03, Cisco MDS SAN-OS Release 2.x
Chapter 23 Configuring Intelligent Storage Services
NASB
To configure NASB using Fabric Manager, follow these steps:
Step 1 Choose Switches > End Devices > SSM Features from the Physical Attributes pane. You see the
Intelligent Storage Services configuration in the Information pane, showing the FCWA tab.
Step 2 Click the NASB tab. You see the NASB configuration in the Information pane.
Step 3 Click the Create Row... icon. You see the NASB configuration dialog box.
Step 4 Select the Switch and SSM Card you want to configure NASB on.
Note The NASB must be enabled and provisioned as a service on this SSM module. See the “Enabling
Intelligent Storage Services” section on page 23-2.
Step 5 Select the VSAN ID you want to configure for NASB.
Note You must configure this VSAN to permit default zoning.
Step 6 Click Create to create this NASB or click Cancel to cancel this change.
Note You cannot simultaneously configure the intelligent services SANTap and NASB on a single
SSM.