Filter
Top Products
Send documentation comments to mdsfeedback-doc@cisco.com.
35-16
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-6965-03, Cisco MDS SAN-OS Release 2.x
Chapter 35 Troubleshooting Your Fabric
Getting Oversubscription Information in Device Manager
Step 4 Click Display Cisco MDS 9000 Only to display only the Cisco MDS 9000 Family switches in your
network fabric.
Step 5 Click Search to discover switches and devices in your network fabric. You see the results of the
discovery in the Locate Switches window.
Note The number in the lower left corner of the screen increments as the device locator attempts to
discover the devices in your network fabric. When the discovery process is complete, the number
indicates the number of rows displayed.
Getting Oversubscription Information in Device Manager
To determine the oversubscription for a module using Device Manager, follow these steps:
Step 1 Right-click the module you want to check oversubscription on and select Check Oversubscription from
the pop-up menu.You see the oversubscription dialog box.
Step 2 Click Close to close this dialog box.