Filter
Top Products
34 Applied Instructions (FX3U-CF-ADP)
34.5 FLCMD / FX3U-CF-ADP command
788
FXCPU Structured Programming Manual
[Basic & Applied Instruction]
Detailed explanation of setting data
Details of the setting data in the FLCMD instruction are as shown below.
*1. The CompactFlash
TM
card is available in the "mounted" status.
*2. The CompactFlash
TM
card is unavailable in the "unmounted" status.
Caution
1) It is not permitted to use an "FLCRT, FLDEL, FLWR, FLRD, FLCMD or FLSTRD" instruction and a
following instruction for the same port:
- "RS or RS2" instruction
- "ADPRW" instruction
- "IVCK, IVDR, IVRD, IVWR, IVBWR or IVMC" instruction
2) The instruction is provided in the FX
3U and FX3UC PLCs Ver. 2.61 or later.
Setting items Description Data Type
Contents of instruction for operation
K-1 : Forcibly writes all buffered data to the CompactFlash
TM
card.
K0 to K63 : Forcibly writes the buffered data of the specified file ID to the CompactFlash
TM
card.
K256(H100) : Sets the CompactFlash
TM
card to the mounted status
*1
.
K512(H200) : Sets the CompactFlash
TM
card to the unmounted status
*2
.
K1280(H500) : Clears error codes stored in the CF-ADP.
ANY16
Channel number used by the CF-ADP
K1 : ch1
K2 : ch2
ANY16